Free standard delivery on UK orders over £20

0

Your Bag is Empty

Samsung Galaxy S 3 GT-i9300 SIII Multi Surface Mount (sku 14495)

SKU: 14495

8 items left

Samsung Galaxy S 3 GT-i9300 SIII Multi Surface Mount (sku 14495)

SKU: 14495

This multi-surface Car Mount with universal phone cradle fits the Samsung Galaxy S 3 / GT-i9300and uses the NEW amazing 'stick anywhere' suction cup from Ultimate Addons.
This mount can be applied directly your dashboard / console area or used on the windscreen.
Unique PU suction pad will adhere to just about any clean dry surface and can be removed and re-applied.

The universal phone cradle is idea if you like to keep your phone in a protective case, skin.

The mount consists of a strong rigid 10cm arm that's fully adjustable and can be positioned vertically or horizontally.
65mm clear PU suction cup is sticky to touch and grips extremelywell.
Will NOT leave any residue or damage a sound surface.
This special PU pad can even be washed, so if it becomes dusty or dirty simply rinse under the tap, leave to dry naturally and it's ready to use again.
Suction cup incorporates lever release to create the vacuum & a removal tab.

How does it works?
We have taken our most popular lever release arm and have incorporated the new PU suction cup.
This PU suction pad is sticky to touch but it's NOT adhesive.
Press the arm's suction cup against a clean dry surface and push down the lever release arm.
This creates a vacuum in the usual way but because of the new PU base, it will hold to both smooth and most textured surfaces on both horizontal or vertical planes without having to use an additional dash disc or friction mount to ensure grip.
Works on:
Vehicle console or cockpit areas
Smooth or textured dashboards (best suited to hard dashes / consoles rather than covered)
Work surfaces, Glass, Kitchen units & cabinets, desks & tables
Will adhere to most flat surfaces, allow a flat area of approx 70mm for the suction cup to stick.
Always check the mount is secure by giving it a wiggle before inserting your device.

The Universal phone Cradle
Phone holder is suitable for usewith or without a case, skin or bumper.
Fits sizes: Height: 65mm plus (65mm is the minimum height the mount fits)
Width: Fits phones from 40mm (min) to 88mm (max).
Button release arms are cushioned and have a retaining lip to keep your phone securely in place.
Hinged support feet are also cushioned and can be folded away.
Function remain accessible.
Cradle can be positioned in portrait or landscape view.
Colour: Cradle white with black. Arm Black

Please note:
To remove the mount you MUST release the vacuum hold.
First lift up the lever then gently pull & lift the removal tab. This breaks the vacuum.
Now you can remove the mount from the surface.
A gentle rocking motion while lifting the removal tab works best.
Please don't just pull at the mount, it wasn't designed to be removed that way.

If you experience problems adhering this mount to a surface please check these steps:
Ensure area is flat enough to take the suction cup completely.
Check that the lever release arm is stored in an up-right position. If left pressed down it will stretch the cup.
Ensure the area is dry, free from grease, oil dust, ash, hair etc. Not suitable for oiled surfaces.
If the suction cup becomes soiled, rinse under the cold tap & leave to air dry to reactivate the super grip PU coating.

This video is an example of the mount & fitting and may not show your device.

What's included?

1 x Multi-surface mount
1 x Adjustable phone cradle