ZS Multi Surface Dash Mount Nokia Lumia 1020 (SKU 18047)SKU: 18047
ZS Multi Surface Suction Car Mount for the Nokia Lumia 1020 mobile smartphone,
Use directly on the dashboard or apply to the glass of your windshield.
Suitable for most flat surfaces - requires a flat area of 70mm.
Dedicated clip in cradle made & designed to contour the Nokia 1020 leaving access to the camera and charging port.
Remove phone from case before inserting.
Simply apply directly to a convenient flat area and view your phone within your line of sight or apply to the windscreen in the traditional way for a really firm grip to glass.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is not adhesive so it can be remove and re- apply as many times as you like allowing you to adjust it's position or transfer it between vehicles.
If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your mobile phone / smart phone closer to you for easier viewing.
The dedicated cradle is bespoke and will not accommodate a case or skin.
Arm length approx 60mm - low level design, neat and unobtrusive.
How to apply your ZS Multi Surface Mount.
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position the ZS arm pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your phone.
Just lift the lever and pull on the release tab to break the vacuum.
The ZS mount can now be removed
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
View the Video below to see how the ZS Multi-surface Mount works.
Note - may not show the holder for your device.
|Bullet 1||ZS Multi-Surface Car Suction Mount and dedicated cradle for the Nokia Lumia 1020 mobile smartphone.|
|Bullet 2||Mounting option features a bespoke clip-in cradle made & designed to contour the Nokia 1020 leaving access to the camera and charging port.|
|Bullet 3||The Mount is suitable for most flat surfaces - requires a flat area of 70mm (2.75"). Simply apply directly to a convenient flat area on the dash or apply to the windscreen in the traditional way for a really firm grip to glass.|
|Bullet 4||The ZS Multi-Surface Mount uses a special PU coated 60mm (2.3") suction cup which is tacky but not adhesive - this enables it to be removed and re-applied many times facilitating postional adjustment and transferal between vehicles.|
|Bullet 5||For vehicles with a deep dash or a steep sloping windscreen, the ZS Multi-surface Mount also allows closer positioning for ease of viewing.|
|Fits Nokia||Nokia Lumia 1020|