Your Bag is Empty
Free standard delivery on UK orders over £20
SKU: 34795
ZS Multi Surface Suction Car Mount for the Samsung Galaxy S7 (not for S7 Edge)
Dedicated clip in cradle made & designed to hold the S6 Edge Plus + securely on the mount.
Suitable for most flat hard surfaces
Simply apply directly to a convenient flat area and view your Galaxy S7within your line of sight or apply to the windscreen in the traditional way for a really good grip to glass.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is NOT adhesive so it can be remove and re- apply as many times as you like allowing you to adjust it's position or transfer it between vehicles.
The PU coated lever release suction cup gives reliable vacuum grip that holds firm to just about any surface within your car.
The sucker requires a minimum flat area of just 70mm diameter for a good grip.
This mount will even hold to textured dashboards and console areas.
So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans.
If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your mobile phone / smart phone closer to you for easier viewing.
The dedicated Galaxy S7cradle is bespoke for that model and is designed to allow full access to all ports and buttons
Arm length approx 60mm - low level design, neat and unobtrusive.
How to apply your ZS Multi Surface Mount.
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position the ZS arm pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your phone onto the holder.
To remove.
Just lift the lever and pull on the release tab to break the vacuum.
The ZS mount can now be removed
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
This bespoke cradle is not suitable for use with a case or skin.
View the Video below to see how the ZS Multi-surface Mount works. May not show the holder for your device.
BuyBits Multi Surface Mount - YouTube
Video will open in a new window
Our delivery options are as follows:
| Free UK Delivery | 2-4 days | FREE (On orders over £20) |
| Standard UK Delivery | 2-4 days | £2.99 |
| Next Day UK Delivery | Monday - Thursday, Excluding Saturdays | £7.99 |
| Saturday UK Delivery | Saturdays | £9.99 |
Please be aware that if you are outside of the EEA, you may be liable to pay import taxes and duties. These are set and regulated by your country and we have no control over these charges. If you are unsure whether your order will be subject to such taxes please check with your local import office.
BuyBits Ltd. is not liable for any additional import tax and or duty charges issued by your country's national import office to you.
| Europe Standard Delivery | 10-14 days | £6.99 |
| Europe Courier Delivery | 3-5 days | £13.99 |
| Rest of World Standard Delivery | 14-21 days | £11.99 |
| Rest of World Courier Delivery | 3-5 days | £19.99 |
| Oceania Courier Delivery | Inc. Australia & New Zealand, 3-5 Days | £35 |
Although we endeavour to deliver within the times specified, we are unable to guarantee any deliveries and no compensation will be offered for late or missed deliveries. If your order is taking longer than expected to arrive, please contact us and we can help.
If any item in your order is out of stock or we need to verify your payment / delivery details we will contact you using the detailed provided. Please note, this may cause a delay in dispatching your order but we aim to dispatch as soon as possible.
