High Power Hardwire 13mm-14.7mm iPhone 5S Motorcycle Fork Stem Yoke Tough Case Mount (sku 21643)

A complete mounting option to hold and charge your Apple iPhone 5S while out on your motorcycle.
Mount consists of:
Ultimate Addons central fork stem yoke mount for holes 13.3mm - 14.7mm (0.52" - 0.58")
Ultimate Addons polycarbonate Tough Case
High Power BuyBits hardwire iPhone 5S with the new shorter charging cable (7"/20cm).

This central fork stem yoke mount has been developed for use on motorcycles where a handlebar mounting option is not possible or desirable.
Designed to fit sports, superbike, endurance and touring motorbikes using the cylindrical bore wall (steering head tube) of the fork stems.

Case Features:
IPX 4 standard offers protection from water splashes / light rain showers, dust & dirt.
This robust protective case has been designed to withstand daily use.
Light-weight yet strong.
Bespoke silicon liner contours the phone perfectly, cushioning it against knocks or bumps and reducing shock if dropped.
Sensitive front lens ensures your phone can be accessed easily.
Make & receive calls
Use camera / video
Headphone socket weather cap
Power access weather cap
Note: This case can be powered with the Ultimate Addons hard wire direct to battery or the Hella DIN motorcycle charger.
Secure hinged opening - book style

Mount Features:
Motorcycle Fork Stem Yoke Mount Fits Stems: 13.3mm - 14.7mm (0.52" - 0.58").
The 1" Ball fixing.
Light weight - made from Aluminium.
Attaches easily to the steering head tube of fork stems.
Easy to fit and completely removable.
3 prong adaptor joins mount to case.

Includes the NEW BuyBits high powered hardwire charger with a shorter power adapter.
Designed for motorcycles - Fused & waterproof.
Small discrete on/off power switch.
Supplied with the shorter 7" (20cm) iPhone 5 series power connector
High quality flexible cable.
Cable length with device adapter approx 2.7m
Cable length without device connector approx 2.5m
Fused - 2amp
Weather cap
Input Voltage: DC 12-24V / Maximum : 16A.
Output Voltage: DC 5V / 2.1A.
Reverse Voltage, Short-Circuit & Overload protection
Built in Surge Protector

IMPORTANT: First check that your stem cover can be removed leaving a central hole for the mount to fix in.
Simply drop the Fork Stem Motorcycle attachment into the hole of the stem and tighten. The split shaft will expand to fit the inside wall of the fork stem Use an Allen Key to tighten to create a tight fit.
PLEASE NOTE:Measure your hole: This option is designed to fit stems that measure from 13.3mm - 14.7mm (0.52" - 0.58")

Video example of this type of mounting option & charger

When fitting the case to the mount you must ensure you engage the three prong attachment system, firmly pushing together until it clicks.Some force will be required. If in doubt view our video or email us.