Product Description
Details
The ZS multi surface suction dashboard car mount with holder for the
Garmin Nuvi 200 series is ideal for keeping your SatNav secure and accessible.
Mount can be used on MOST FLAT SURFACES - SO EASY - NO NEED FOR ADDITIONAL DASH DISCS or FRICTION MOUNTS.
Apply directly to the dashboard / console and view your Garmin Nuvi 200 series conveniently within your line of sight or apply to the windscreen in the traditional way for a really FIRM grip to glass.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is NOT adhesive so it can be removed and re- applied as many times as you like allowing you to adjust it's position or transfer it between vehicles.
The PU coated lever release suction cup gives reliable vacuum grip that holds firm to just about any surface within your car.
The sucker requires a minimum flat area of just 70mm diameter for a good grip.
This mount will even hold to textured dashboards and console areas.
If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your SatNav closer to you for easier viewing.
The dedicated Garmin Nuvi cradle detaches easily from the ZS Mounts so the arm can be left in position if required.
Function areas remain fully accessible.
Arm length approx 60mm - low level design, neat and unobtrusive.
To remove; Just lift the lever and pull on the release tab to break the vacuum.
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
The Video below is an example of the MULTI SURFACE MOUNT and may not show the holder in the description.
List of Compatible Devices
Garmin Nuvi 200
Garmin Nuvi 200W
Garmin Nuvi 205
Garmin Nuvi 205W
Garmin Nuvi 250
Garmin Nuvi 250W
Garmin Nuvi 255
Garmin Nuvi 255W
Garmin Nuvi 260
Garmin Nuvi 260W
Garmin Nuvi 265T
Garmin Nuvi 265WT
Garmin Nuvi 270
Garmin Nuvi 275T
Additional Information
Additional Information
Bullet 1 | The ZS multi surface suction dashboard car mount with holder for the Garmin Nuvi 200 series. |
---|---|
Bullet 2 | Fits the Garmin Nuvi 200, 200W, 205, 205W, 250, 250W, 255, 255W, 260, 260W, 265T, 265WT, 270, 275T. |
Bullet 3 | The ZS mount uses a special PU coated 60mm suction cup which adhears to most hard flat surfaces. Requires a minimum flat area of just 70mm diameter for a good grip. |
Bullet 4 | Suitable for both smooth & textured surfaces. Reliable lever release vacuum grip. |
Bullet 5 | Includes a dedicated Garmin Nuvi holder cradle. Function areas remain fully accessible. |
Manufacturer | BuyBits |
Fits Garmin | Garmin Nuvi 200 |
Brand | Garmin |
Mounting Type | Multisurface |
Colour | Black |
EAN DNU | No |