Free standard delivery on UK orders over £20

0

Your Bag is Empty

RAM Wheelchair Seat Mount for Xbox Adaptive Controller (RAM-238-WCT-9-MS2) (sku 53935)

SKU: 53935

Clamp the small RAM® Tough-Claw™ to your wheelchair – as well as rails, bars and flat surfaces – to enable use of the Microsoft Xbox Adaptive Controller. The controller attaches directly to the included RAM® diamond base adapter with 1.5” ball and double socket swivel arm, allowing for a 90-degree tilt so you can angle the adaptive controller exactly where you need it. When you’re not using the Xbox Adaptive Controller, swap it out with any compatible RAM® 1.5” ball base, such as the RAM® X-Grip® cradle for phones and tablets. Attaches to most wheelchair arm track systems including Invacare, Permobil, and Quickie, as well as any other universal mounting point with the included universal hardware pack. This inclusive gaming kit includes hardware and a hex wrench for mounting an Xbox Adaptive Controller.

HARDWARE INCLUDED
(2) #10-24 x 1/2" Machine Screws
(1) 5/32" Hex Key Wrench
(2) #10-32 T-Nuts
(2) #10-32 Flat Weld Nuts
(2) #10-32 x 1/2" Machine Screws
(2) M4 x 12mm Machine Screws
(2)M4 x 20mm Machine Screws
(2) M4 Stainless Steel Washers
(2) M4 Nylock Nuts
T-BOLT DIMENSIONS
Large: .48" x .95"
Small: .375" x .593"
HOLE PATTERN
2-Hole AMPS 1.912" (both plates)
BALL/SOCKET SIZE
C Size (1.5")

(BuyBits use only - RAM-PA8209 - RAM-200-1U - RAM-238-WCT - RAM-238-MS2 - RAM-201U-B - RAM-218-1U)